CMP Brilliant wonders 25677 series Installation Instructions Manual Download Page 2

2

1. PRODUCT OVERVIEW

Thank you for choosing our 25677 Series Brilliant Wonders LED Waterfall. This lighted waterfall will add a 

unique ambiance to your pool or other outdoor feature.  In addition to our other waterfall products, this 

unit includes an embedded LED light that uses a wireless remote controller (Sold Separately or supplied) for 

convenient customer customization. 

 

1.1 Packing List

 

(A) LED Water Fall Unit    

 

 

 

Qty - 1

(B) 

Screen 

 

      Qty 

1

(C) Rock Trap  

 

 

 

 

 

Qty - 1

LED Lighting Strip – Installed at factory  

 

Qty - 1

(D) Square to Round Adapter PVC  

 

 

Qty - 1

(E) Square Plug PVC  

 

 

 

 

Qty - 1

(G) Front access doors    

 

 

 

Qty - 2

2. SAFETY

Please take a moment to read through the included important safety information. Following these safety 

requirements should prevent any damage to your new LED waterfall or controller.

WARNING!

Risk of Shock or Electrocution

This waterfall light must be installed by a licensed or certified electrician or a qualified pool serviceman 

in accordance with the National Electric Code (NEC) and all applicable local codes and ordinances. 

Improper installation will create an electrical hazard which could result in death or serious injury to pool 

users, installers, or others due to electrical shock. Always disconnect power to the light at the circuit 

breaker before servicing. PLEASE READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL.

WARNINGS AND IMPORTANT SAFETY PRECAUTIONS

WARNING

WARNING

Summary of Contents for Brilliant wonders 25677 series











Reviews: