3
B. INSTALLATION
Your CMP Skimmer includes the following:
• Skimmer Body
• Skimmer Collar & Cover
• Weir Door
• Float Valve (select models)
• Debris Basket
1. DECK & POOL PLACEMENT
• For optimum skimmer functionality, the skimmer should be placed relative to the prevailing wind and water flow direction.
• Support skimmer securely in position during installation. An “x” shaped support is provided on the bottom of the skimmer
for temporary mounting on a 2in stand pipe.
• Rebar tie points to tie the skimmer to the rebar cage of the pool are provided at the top of the skimmer.
• The deck ring collar has a friction fit that allows vertical adjustment. Extension collars (25526-200-000) may be stacked
upon each other to accommodate deck height as needed. See product dimensions for detailed measurements.
Collar
Rebar
Ties
Water
Stop
Cold
Joint
Concr
et
e
Concr
et
e
Water
Level
To Pump
Suction
To Main Drain
or Equalizer
Optionally
Plug Second
Port
FIGURE 1
2. PLUMBING
• The skimmer has two 2” ports for plumbing. The rear port should connect to the pool suction. The front port may be
used as an equalizer line or connect to the pool main drain. If the front port is not used it should be plugged.
• Assemble piping and pipe fittings to skimmer. All piping must conform to current local and state plumbing and sanitary
codes.
• Long pipe runs and elbows restrict water flow. For best efficiency, use the fewest possible fittings and 2” pipe for 2”
skimmers. Using sweep 90 ̊ fittings or two 45 ̊ fittings in place of a single 90 is more efficient.
• For pressure testing seal off any unused ports.
• NOTICE: Over tightening the threaded plugs may result in failure of the plug or the skimmer body and will not be covered
under the terms of the Limited Warranty. DO NOT use tapered metal plugs as this will void manufacturer’s warranty.
• Ensure piping is adequately supported on undisturbed earth. If additional backfilling and tamping is necessary, do not
stress pipe or skimmer port by lifting or moving pipe after skimmer port connections have been made.
IMPORTANT SAFETY INSTRUCTIONS.
READ AND FOLLOW ALL INSTRUCTIONS