CMT2380F17
Rev0.1 | 198/347
www.cmostek.com
Bit 6: POE6, PCA0 PWM6 main channel (PWM6O) output control. 0: Disable PWM6O output on port pin.
1: Enable PWM6O output on port pin. Default is enabled.
Bit 5: C0PPS2, {PWM6, PWM7} Port pin Selection 2.
C0PPS2
PWM6
PWM7
0
P6.0
P6.1
1
P3.0
P3.1
17.4.13
Variable Resolution on Central Aligned PWM
In Section “Enhanced PWM Control”, it defines the central aligned PWM only support the 8/10/12/16-bit
resolution. And in that mode, all of PCA functions, capture or compare, on other non-PWM modules are still
available.
If it is necessary to apply the variable resolution on central aligned PWM, software must set C0M0 to
enable the PCA0 to support this function operating. In this mode, PCA0 can support all compare or PWM
modes. Otherwise, not support. Please note when using Central Aligned PWM with C0M0 = 1, Please note
when using Central Aligned PWM with C0M0 = 1, we suggest to set the PWM module under 16-bit mode and
the base timer need to use 16-bit 0xFFFF to minus the value to prevent unexpected error.
Figure 17-21. Central Aligned PWM with Variable Resolution
Summary of Contents for CMT2380F17
Page 27: ...CMT2380F17 Rev0 1 27 347 www cmostek com 1 25 Phase Noise...
Page 177: ...CMT2380F17 Rev0 1 177 347 www cmostek com Figure 17 3 PCA Interrupt System...
Page 246: ...CMT2380F17 Rev0 1 246 347 www cmostek com SnMIPS S0MI S1MI 1 P3 3 P4 7...