AN279
Rev 0.7 | 26/32
www.hoperf.com
5.3 Error Upgrade Handling
CMOSTEK provides several types of offline burner. Different types of offline burner correspond to different
upper computer software names, version ranges and degrade operation file names, shown in the following
table. When users apply more than one type of burner at the same time, it is required to select the right upper
computer software acording to type of the offline burner.
Table 16. Offline Information
No.
Offline wirter
name
Upper computer
software name
Upper computer
software version
range
Degrade file
name
Description
1
CMOSTEK
Offline Writer
CMOSTEK
WriterConfig
V130 - V499
brn-
V4.9.9.32c
CMOSTEK general
Offline Writer
2
CMT2380F32
Offline Writer
CMT2380F32
WriterConfig
V100 - V129
brn-
V1.2.9.32c
CMT2380F32
Offline Writer
3
CMT216xA
Offline Writer
CMT216xA
WriterConfig
V500 - V599
brn-
V5.9.9.32c
CMT216xA serial
Offline Writer
When the user applies more than one type of burner at the same time, there may be error upgrade due to
operation error. For example, the user needs to use the CMT2380F32 WriteConfig upper computer software,
but the CMT216xA WriterConfig upper computer software is opened mistakenly. The corresponding
CMT216xA burning device firmware version is higher than the CMT2380F32’s, instananeously there will
prompt an upgrade firmware notice. If the user mistakenly clicks OK, this will lead to an error firmware
upgrade, affecting the normal use of the burning device.
When the above mistake operation occurs, user can follow the following steps to restore the burner to the
normal state as before.
1.
Power on the offline burner hardware through USB
2.
Turn off the host computer software that has been opened mistankenly.
3.
Select the target file on the host computer and rename it to the degraded file name
For example
：
Select the correct upper computer software, click the right mouse button-> Property -> Open the file
location and select the target file with the largest xyz value (the target file with the largest version) in
