CMi RoboPro CE5000-40-CRP:, User Manual

Page: 4 / 23

RoboPro CE5000-40-CRP : CMi User Manual 2010
Last Update : March 25, 2011
CMi / J. Pernollet 4/23
Note: If you wish to use the 09U blade as a standard tool, the default setting
condition is saved in the condition number 2
.
Blade part Nos., Displayed blade types and displayed CUTTER OFFSET values
Reference pen conditions for plotting pens
Doing a cutting test
Test cutting can be done ONLY after specifying the cutter-blade length, OFFSET,
FORCE, SPEED and QUALITY settings to ensure that the selected cutting conditions
produce the desired results.
•
Use the arrows position keys to move to the position you want to perform the
cutting test and press the “TEST” key.
•
Once the test is completed, the blade carriage moves to its standby position.
•
Press “ENTER” to return the blade carriage to the previous position and to
switch the RoboPro to “READY” mode.
•
Check the corners of the triangle (test pattern) to then adjust the OFFSET.