29
Original instructions
Random orbital sander
Dear customer,
Thank you for placing your trust in our prod-
uct!
Before using the product for the first time,
please make sure you read these operating
instructions! Here you will find information
about how to use the product safely and
ensure its long service life. You should pay
attention to all of the safety instructions in
this document!
Table of contents
Before you begin… . . . . . . . . . . . . . . . . 29
For your safety . . . . . . . . . . . . . . . . . . . 30
General safety instructions .................. 30
General power tool safety warnings .... 30
Work area safety .................................. 30
Electrical safety ................................... 30
Personal safety .................................... 30
Power tool use and care ...................... 31
Service ................................................. 31
Safety information for random orbital
sanders ................................................ 31
Special safety notes regarding sandpaper
sanding ................................................ 32
Special safety notes regarding polishing
.............................................................. 32
Additional safety information ............... 32
Dust extraction .................................... 32
Risks caused by vibrations .................. 33
Personal safety equipment .................. 33
Your machine at a glance . . . . . . . . . . . 33
Scope of supply ................................... 33
Commissioning . . . . . . . . . . . . . . . . . . . 33
Fitting the sanding sheet ..................... 33
Setting the angle of the front handle ... 33
Operation . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . 34
Overview of cleaning ........................... 34
Empty the dust container .................... 34
Malfunctions and troubleshooting . . . 34
In the event of a malfunction… ............ 34
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . 35
Disposal of the appliance .................... 35
Disposal of the packaging ................... 35
Technical data . . . . . . . . . . . . . . . . . . . . 35
Accessories ......................................... 36
Claims for defects . . . . . . . . . . . . . . . . 109
Before you begin…
Intended use
When used for its intended purpose, this
device corresponds to the state of the art, as
well as to the current safety requirements at
the time of its introduction.
The appliance is intended exclusively for
non-professional use for dry sanding of
wood, plastic, filler, and painted or varnished
surfaces.
The appliance is not suitable for sanding
plaster-based substrates.
The device is not suitable for commercial or
industrial use.
Any other type of use is inappropriate.
Improper use or modifications to the device
or the use of components that are not tested
and approved by the manufacturer may
result in unforeseen damage!
Any use that deviates from its intended use
and is not included in these instructions is
considered unauthorised use and relieves
the manufacturer from his or her legal liabil-
ity.
What are the meanings of the symbols
used?
Danger notices and information are clearly
marked throughout these instructions for
use. The following symbols are used:
DANGER!
Direct danger to life and risk of
injury!
Directly dangerous situation that may
lead to death or severe injuries.
WARNING!
Probable danger to life and risk of
injury!
Generally dangerous situation that
may lead to death or severe injuries.
GB
Exzenterschleifer_450211.book Seite 29 Dienstag, 3. Dezember 2013 9:25 09
