Xcorpio User's Manual
5
Contents in the Xcorpio package
Before installing Xcorpio, please make sure you found all the items in the
Xcorpio package as show below.
• 1 Xcorpio audio interface (Xcorpio A or Xcorpio I, depends on the model
you chose)
• 1 USB cable (about 1.8m)
• 1 protective pouch
• 1 metal clasp (including screw)
• 1 user’s guide (This manual)
• 1 driver CD
About the special accessories of Xcorpio
There are two special accessories in the Xcorpio package. One is the protective
pouch and the other one is the metal clasp. With the pouch, you can take the
Xcropio out and protect it from damage. In mobile condition, the metal clasp is
more helpful for usesr to hang Xcorpio on the belt or guitar strap.
If you want to use the clasp, please follow the steps below to assemble it.
1. Please take out the attached metal clasp and screw from the Xcorpio
package. Please note that you have to use the screws in the package. It
may damage the electrical circuit of Xcorpio if you use other screw, and
this kind of damage is not covered under warranty.
2. Lock the screw into the small hole slightly on the back of Xcorpio fi rst.
Then unlock the screw.
3. Put the metal clasp on the indent on the back of Xcorpio and lock it with
screw.