2 Installation guide
2.1 Power supply
A
、
Use USB Power
：
1. Make sure the power switch is set to OFF.
2. Connect the product to the computer via USB cable.
B
、
Use AC adapter Power
：
1. Make sure the power switch is set to OFF.
2. Connect the AC adapter (optional) to the POWER IN port in the rear panel.
3. Make sure the AC requirement of the AC adapter is compliant with the local AC
supply, then connect the AC adapter to the power supply outlet.
Make sure the AC requirement of the AC adapter is compliant with the local
AC supply, otherwise it will cause severe damage to the AC adapter or the
instrument, and it may cause electrical shock!
Only the AC adapter designed for this product should be used. If you cannot
find the right adapter or the adapter does not work, please contact local CME
dealers. The usage of an improper adapter may cause fire or electrical shock!
The AC adapter varies from country to country. If you take the product from
one country to another, please make sure your AC adapter compliant with the
local power supply. If you are not sure about the technical information for the
power supply or the adapter, you can consult a qualified local electrical
engineer.
2.2 Power on order
When you have this product connected to a system, please set all the volume to
minimum then follow the proper order to turn all the devices on: master MIDI device
(which sends out MIDI data), slave MIDI device (which receives MIDI data), audio
devices (mixer, amplifier, speakers). When you follow this order, all the signals (MIDI and
audio) will go properly from the beginning to the end. If you will turn off the system,
please follow the reverse order (turn off the audio devices first, then the MIDI deivces).
11
