Reach and Reach
HD
- Information and Instruction Sheet
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN
T
: 01709 829 511 |
F
: 01709 378 380 |
E
W
: www.cmd-ltd.com
Part Number 133813 Issue 5 Date: 30/07/18
Cleaning, Storage and Maintenance
Service Components
Available to order.
Cleaning &
Maintenance
Dry cloth, no abrasives or solvents
to be used on the product surface.
Handling & Storage
Do not drop.
Warning
Do not exceed the recommended maximum weight.
We recommend using the pre-cut EVA pad to improve grip
and protect the desk surface.
Fixing Instructions
1.
Reach and Reach
HD
come supplied with the top
fixing C clamp as standard. Place the stem and
spreader on the edge of the desk and secure
using the top fixing bracket. Note: An EVA pad
is included in the fixing kit to improve grip and
protect the desk surface.
2.
Remove the grub screw from the back of the stem
and place the C clamp cover over the C clamp.
3.
Install the lower arm section into the C clamp stem
and replace the grub screw. Tighten as required.
4.
Install the upper arm section into the lower arm
section. Tighten the grub screw as required.
5.
Attach the quick release VESA to the back of the
monitor using the screws provided (12mm and
16mm screws are provided).
6.
Attach the monitor to the arm by sliding the VESA
into the head assembly until you hear a load click.
7.
To adjust the arm, insert an Allen key into the
adjustment nut and rotate clockwise for heavier
monitors or counter clockwise for lighter monitors.
NB Scan the QR code below to see the installation
video, which includes details of how to change the
fixing options shown below.
Fixing Options
1.
2.
3.
Attaching The Monitor
Single Reach Arm Assembly
4.
7.
Adjusting The Arm
5.
6.
Top Fixing
Split Fixing
Through Desk
Rail Fixing
1x
1x
1x
1x
1x
4x M4*12mm
4x M4*16mm
M10*60
1x
1x
1x
1x
1.5MM
1x
1x
1x
1x
1x
2.5MM
4MM
5MM
6MM
Contents
8MM
