cmc Instruments GmbH
14
version 3.6-05/18
6. INSTALLATION OF COMMUNICATION UNIT
Install the sensor.
Connect the cable from the communication unit / module to the sensor (or in case of
the High Temperature Option, to the separated high temperature box).
Finally, connect the power adapter, first with the communication unit and then the
power supply.
Please note that the supply voltage match the specifications on the nameplate of the
power supply!
OilQSens
®
is now ready to measure.
3 green LED's are mounted on the communication unit. The top LED indicates whether
WLAN activity is present (optional feature). The middle LED lights up when operation
of the communication unit is established. It flashes briefly when something is sent over
the serial RS232 interface. When it is permanently on, the communication unit is not
ready for use. The lower LED blinks at different time intervals and indicates the sensor
is measuring. If this LED lights permanently, or is permanently out, there is a problem
with the measurement. Please contact the manufacturer.
