CMC NB-CRTC643 Instruction Manual Download Page 2

Product Introduction

Working Principle

1

The microcomputer ceramic cooker hob  directly  employs  resistance

wire  heating,   and  realizes   power   regulation   with   the  microcomputer

controlling different heating time and closing time of the resistance wire.

High temperature protection

The temperature sensor mounted on the radiant electric the temperature

inside the cooker from time to time. When an excessive temperature is

detected, the cooking plate will be directly disconnected and stop power

output.

Safety

Dear customer,
Thank you for purchasing the the  ceramic cooker hob.
Our product can serve you many years to your satisfaction.
Please read this instructions manual carefully before using and installation.
Keep it in a good place after reading for future reference.
Thank you again for your purchase of the ceramic cooker hob, and wish
you to enjoy the pleasure brought about by it.

The  microcomputer  ceramic  cooker  hob  can  meet  different  kinds  of

cuisine    demands   because    of   resistance  wire    heating,    micro-

computerized control and multi-power selection, really the optimal choice

for modern families.

The  ceramic cooker hob centers on customers and adopts personalized

design. The hob has safe and reliable performances, making your life

comfortable and enabling to fully enjoy the pleasure from life.

Summary of Contents for NB-CRTC643











Reviews: