manualshive.com logo in svg

CMC ARIZONA VORTEX KIT, User Manual

Share
Download
CMC ARIZONA VORTEX KIT User Manual Download Page 27

LOAD

LOAD

LOAD

HOBBLE STRAP

HOBBLE STRAP

SIDE VIEW

TOP VIEW

VIEWS

GUYLINE

GUYLINE

GUYLINE

GUYLINE

GUYLINE

GUYLINE

GUYLINE

APPLIED 

FORCE

Directional Frame

MODE OF USE:

CONFIGURATION:

A-Frame  

A

Keep the Applied 

Force centered within 

the footprint/Frame 

Plane of the Bipod.

B

CONFIGURATIONS

A-FRAME BIPOD

An A-Frame configuration requires guylines con-

nected to anchors both to the front (near or over 

the edge) and to the back of the frame. Additional 

guylines may be needed to prevent the A-Frame 

from moving sideways if the load were to shift 

laterally.

The A-Frame configuration shown is a 

Directional Frame

 

as the rope supporting the load is directed through a 

pulley on the head and is not anchored to the frame. 

The example shown would require a combination of 

hobbles and Raptor Feet inserted into crevices and 

guys to provide security and stability.

  

|

  

cmcpro.com

27

Summary of Contents for ARIZONA VORTEX KIT

































Reviews:

No comments

Brands by name

Popular brands

Load more brands