#777
~
Rev. 2013
Page 4
OPTIONAL MESH SCREEN KIT INSTRUCTIONS:
Install the rod brackets
(b)
using 1/4” screws
(e)
into the tapped hole on the vertical leg of corner brackets.
(
Figure 6)
Install a mesh curtain (with the handles towards center) on each side of the curtain rod
(a)
.
NOTE:
To create a pleated
appearance in the mesh curtain, twist each curtain ring one-half turn as it is installed on the curtain rod.
Insert the curtain rod ends into each rod bracket in turn.
NOTE
: To keep the curtains from sliding to the center, leave the
last curtain ring loose until the rod is installed then hang the loose rings on the hooks provided on each Rod Bracket.
Attach the curtain rod center bracket using a
⅜
” screw
(d)
and track nut
(c)
.
(Figure 7)
It may be easier to insert the
screw
(d)
through the center bracket, loosely thread on the track nut, and then slip the nut into the frame track. Tighten
the screw securely.
a
b
c
e
d
Mounting Hardware
a
1 ea. Curtain Rod
b
2 ea. Rod Bracket
c
1 ea. 1/4-20 Track Nut
d
1 ea. 1/4-20 x
⅜
” Screw
e
2 ea. 1/4-20 x ¼” Screw
Figure 7
Figure 6
Ring Hook
Five Year Limited Warranty for Legacy ZC Glass Doors
Custom Metal Comp.
warrants its Legacy ZC Glass Doors to be free from defects in metal materials and/or workman-
ship, under normal use and conditions of service, for a period of five (5) years, subject to the limitations outlined be-
low. Glass is warranted to be free from defect in materials, under normal use and conditions of service, for a period
of one (1) year, subject to the limitations outlined below. This warranty is non-transferable and is extended exclu-
sively for the benefit of the original purchaser beginning on the original date of retail sale.
Custom Metal Comp.
will,
at its option, repair or replace any part that fails due to a defect in materials or workmanship at no charge (exclusive
of freight) subject to the limitations of this warranty.
This warranty covers repair or replacement of parts only and applies exclusively to products purchased for consum-
er use. This warranty does not cover damage caused by transportation and/or handling or which results from altera-
tion, accident, misuse, abuse, or improper installation. It also makes no warranty as to maximum temperature and
stresses which may cause discoloration of metal finishes, distortion of metal parts, and/or glass breakage.
This warranty constitutes the entire warranty with respect to
Custom Metal Comp
. and/or its products.
Custom Metal
Comp
. shall not be liable for consequential or indirect damages which are caused by defects in its product, by its repair
or replacement.
Custom Metal Comp.
makes no other warranty, expressed or implied, including any warranty of mer-
chantability, or warranty of fitness for a particular purpose. Implied warranties of merchantability and fitness for a
particular purpose which may arise under state law are also limited in duration to five years from the original pur-
chase of this product. Some states do not allow such limitations, in which case this limitation may not apply. The
consumer may have other rights that vary from state to state.
If, during the warranty period, a product covered under this warranty proves to be defective in material or workman-
ship, a claim for warranty service should be made through
Fireplace Doors Online
. Proof of purchase
will be required. The authorized dealer will procure replacement parts and/or contact
Fireplace Doors Online
if additional service is deemed necessary.
If you have questions about your product or the terms of your warranty please contact:
Fireplace Doors Pnline
~
21
701
RT 6
~
Warren, PA
16365
When applying for warranty replacement, or ordering replacement parts, always specify the type of
product, the color, the height, and width. Describe the damaged or defective part in detail. Please
provide digital pictures if possible.
