CMA Dishmachines UC65e M2, Installation/Operation Manual With Service Replacement Parts

Page: 19 / 58

13
After Each Meal Period or every 8 Hours of Operation.
1. Press the lighted power switch to the OFF position. The power switch light will go out.
2. Open the door and remove the overflow tube from the wash tank sump.
3. Inspect and clean the overflow tube rubber seal
4. Close the door.
5. Push and hold the drain switch until all of the water has drained.
6. Remove the sump filter carefully to keep the soil or waste particles from falling into the sump.
7. Clean the sump filter by rinsing with clean water.
Be sure to back-flush the filter.
Do not strike the filter against solid objects.
8. Check the sump for foreign material and clean as required.
9. Replace sump flter and the overflow tube.
10. Make sure that spray arms turn freely.
11. Check the chemical containers and refill as required.
12. Close the door and turn the ON/OFF switch to ON and return to normal operation mode.
Cleaning and Maintenance
Cleaning
Sump
Sump
Filter
Overflow
Seal
Overflow
Tube
Heating
Element