FingerPrintScan System FPC 1381
– Technical Handbook
page 12
Version 2.00
- Operator account:
This access level is shown when
a) an installer password but no operator password has been set or
b) an installer and an operator password have been set and the operator has
logged in with his password.
- Installer account:
This access level is shown when an installer password has been set and the
installer has logged in with his password.
12.4. Login
If an installer password or an operator password has been set, one must login as
follows:
In the basic menu press
↓ or ↑. Enter the code:
Using the arrow keys one can enter the code and confirm the input
with “OK”.
12.5. Logout
If a time passes without input then the basic display is automatically shown. When
one wishes to continue only
↓ or ↑ must be pressed and then one can work at the
same operating level as before without re-entering the code. The access level will
only return to the former level automatically after 10 minutes. If the access level was
previously changed then one can press the "OK" key, allowing one to view the "Last
Finger" display. This display discards the last previously inputted code and in order to
continue one must enter the code again.
code-entry
>A < >Abbr.<
