FingerPrintScan System FPC 1381
– Technical Handbook
page 18
Version 2.00
At first using the ↑ and ↓ keys the personal ID number can be selected. After pressing
→ the cursor moves to the first letter of the name. The letters can be selected by
using ↑ and ↓ keys to go through the alphabetically listed letters. When the desired
letter appears,
pressing → lets you continue with the selection of the next letter.
When the name is completely spelled out, press "OK" and the name is stored.
Giving names on the PC makes entering information easier. For this the optional
interface converter is necessary. (See page:
Fehler! Textmarke nicht definiert.:
Fehler! Verweisquelle konnte nicht gefunden werden.. Fehler! Verweisquelle
konnte nicht gefunden werden.
)
12.9.4. System Parameters
In this submenu all system relevant parameters are set. With th
e keys → and ← the
individual parameters can be selected.
With ↑ they are set or activated and with ↓
they are deleted or deactivated.
12.9.4.1. Key tone
Off:
No acoustic signal when pressing keys
On:
When pressing keys a short beep tone is issued in the EU.
12.9.4.2. Error tone
Off:
No acoustic signal when an error occurs
On:
When an error occurs (e.g. scanner not connected) a short beep tone is
issued in the EU.
12.9.4.3. User Code
This parameter activates the operator code for the operator level. If this parameter is
activated (on) the operator has access to the system only after entering the operator
code. The operator code can be activated only in conjunction with the installer code.
The 1-6 character code is entered in the menu operator code.
12.9.5. User Code
Here an operator code can be defined.
Using the keys ↑ and ↓ in alphabetical order the letter of the currently selected
position can be changed.
With the → and ← keys the position can be selected.
Pressing "OK" confirms the code.
User-Code
> < >Abbr.<
