Club Car XRT 950 2009, Maintenance And Service Manual

Page: 36 / 256

4
Under Seat Closeout Panels BODY AND TRIM
1179
Figure 4-22 Under Pedal Closeout Panel Removal
UNDER PEDAL CLOSEOUT PANEL INSTALLATION
1. Install under pedal closeout panel in the reverse order of removal.
UNDER SEAT CLOSEOUT PANELS
See General Warning on page 1-2.
UNDER SEAT CLOSEOUT PANEL REMOVAL
1. Raise the cargo bed and engage the cargo bed lock pin (1) located at the driver side cargo bed hinge (2).
(Figure 4-23, Page 4-12) .
2. Remove seat bottom from vehicle.
3. Locate the center closeout panel. Flex closeout panel to disengage front lower lip that rests behind seat belt
anchors and rotate up and back towards rear of vehicle. Remove center closeout panel from vehicle
(Figure
4-24, Page 4-12) .
1
2
1. Locking Pin 2. Bed Locking Pin Holes
Figure 4-23 Bed Locking Pin 1134
Figure 4-24 Center Closeout Panel Removal – flex and
lift front lower lip
Page 4-12 2009-2012 XRT 950 Maintenance and Service Manual