Club Car XRT 950 2009, Maintenance And Service Manual

Page: 171 / 256

ELECTRICAL COMPONENTS Warning Lights
12
WARNING LIGHTS
See General Warning on page 1-2.
TESTING THE WARNING LIGHTS
See Test Procedure 17 – Low Oil Warning Light Circuit on page 11-32.
WARNING LIGHT REMOVAL
1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline Vehicles on page 1-4.
2. Raise the hood and remove the access panel.
3. Disconnect the wires from the warning light (1) (Figure 12-7, Page 12-5) .
4. Press the retaining tabs and remove the warning light from the instrument panel.
1
7
4
6
5
2
3
1167
Figure 12-7 Instrument Panel Electrical Components
WARNING LIGHT INSTALLATION
1. Push a new warning light into the hole in the instrument panel until the plastic tabs are securely engaged (Figure
12-7, Page 12-5) .
2. Reconnect the wires from the wire harness to the warning light.
3. Install the access panel and lower and secure the hood.
4. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline Vehicles on page 1-4.
2009-2012 XRT 950 Maintenance and Service Manual Page 12-5