SECTION 9 – REAR SUSPENSION
9
DANGER
• See General Warning on page 1-2.
WARNING
• See General Warning on page 1-2.
REAR SHOCK REMOVAL
1.
Disconnect battery and spark plug wire(s).
See Disconnecting the Battery – Gasoline Vehicles on page 1-4.
2.
Lift and support the rear of the vehicle on jack stands and remove the rear wheel.
3.
Raise the cargo bed and secure with the bed locking pin.
See Cargo Bed, Section 4, Page 4-20.
4.
Remove the bolt securing the rear shock absorber to the trailing arm
.
5.
Remove the lock nut and bolt securing the rear shock absorber to the chassis
.
1111
Figure 9-1
Lower Shock Bolt
1110
Figure 9-2
Upper Shock Bolt and Lock Nut
1112
Figure 9-3
Removing Rear Shock
2009-2012 XRT 950 Maintenance and Service Manual
Page 9-1