Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 366 / 414

23
Drive Clutch GASOLINE VEHICLE - CLUTCHES
1
2
3
4
4
1
2
3
3053
Figure 23-8 Drive Button Mounting
601
Figure 23-9 Weight Position
5. Remove the clutch weights:
5.1. Remove the screws (1) and flat washers (2) attaching the weights (3) as shown (Figure 23-9, Page 23-8) .
5.2. Pull the weight assemblies (3), with pins, from slots (4) in the clutch. See following NOTE.
NOTE: Before removing, note the orientation of the wave washer (1) and secondary weight (2) on the primary
weight (3) (Figure 23-10, Page 23-9) .
5.3. Remove the plastic washers, weights (2 and 3) and wave washer (1) from the pin (4). Retain all parts.
Page 23-8 2019 Precedent Villager 2 Maintenance and Service Manual