Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 347 / 414

GASOLINE VEHICLE - FUEL SYSTEM Fuel Pump Module
21
2.2. Make sure that the fuel line is routed correctly (Figure 21-14) .
Figure 21-14
3. Clean spilled and remove any drained gasoline from the area.
4. Connect battery.
See Connecting the Battery- Gasoline Vehicles on page 1-3.
5. Place the Forward/Reverse handle in the NEUTRAL position, chock the wheels, and the neutral lockout switch in
the MAINTENANCE position
(Figure 24-1, Page 24-1) .
6. Turn the key switch to the ON position and check for fuel leaks. Repeat as necessary to build fuel pressure.
Any leaks found must be fixed.
DANGER
• Repair all fuel leaks before returning the vehicle to service.
7. If no leaks are found, place the neutral lockout switch in the OPERATE position (Figure 24-1, Page 24-1) .
FUEL PUMP MODULE
See General Warnings on page 1-2.
GENERAL INFORMATION
NOTE: The fuel pump and fuel level sending unit themselves are not replaceable. If necessary, the fuel pump
module must be replaced as an assembly.
The fuel pump module can be disassembled to replace the fuel filter.
The EFI gasoline vehicle is equipped with an electric fuel pump. The fuel pump is protected by a filter and pickup
screen.
2019 Precedent Villager 2 Maintenance and Service Manual Page 21-19