UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK
Unitized Transaxle Disassembly
Page 16-16 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
16
Unitized Transaxle Disassembly, Continued:
4. Remove seven bolts (92 and 93), mounting each axle tube to the transaxle case (Figure 16-4, Page
16-4). Then remove axle tubes from the transaxle case and differential lock housing. See following
NOTE.
NOTE: It may be necessary to tap the axle tube with a rubber or plastic mallet to break it free from the tran-
saxle case or differential lock housing.
5. If necessary, remove the brake cable brackets from the axle tubes:
5.1. Remove the bolt (17), washers, and lock nut from the bracket (Figure 16-23, Page 16-11).
6. Remove the differential lock housing (36) from the transaxle case (27) (Figure 16-40, Page 16-16).
7. Remove the four bolts (35) and the differential guard (34) from the transaxle.
8. Remove the fifteen bolts (28) that hold the transaxle housing together (Figure 16-40, Page 16-16).
Figure 16-40 Transaxle Gear Casing and Brackets
ClubCar
31
30
3
4
15
6
5
7
8
9
11
12
13
10
16
17
18
22
23
21
32
19
20
24
25
29
28
26
27
1
2
33
TYPICAL
2 PLACES
TYPICAL
15 PLACES
TYPICAL
3 PLACES
2
14
35
34
TYPICAL
4 PLACES
36
