Club Car Onward 4 Passenger, Operator'S Manual

Page: 43 / 96

ONWARD HP NON-LIFTED 4-PASSENGER ELECTRIC
Operators Manual
TPCC01DU00EN020 (Edition A)
Page 41
• Corrosion
• Cracks
• Loose connections
• Missing pins
• Worn pins
CLEAN THE ELECTRICAL PLUGS AND RECEPTACLES
DANGER
LUBRICATING THE PLUG AND RECEPTACLE WITH THE AC CORD
CONNECTED TO A POWER SOURCE CAN CAUSE PROPERTY
DAMAGE, ELECTRICAL SHOCK, SERIOUS PERSONAL INJURY, AND
DEATH. DO NOT LUBRICATE THE PLUG AND VEHICLE CHARGER
RECEPTACLE WITH THE AC CORD CONNECTED TO A POWER
SOURCE.
1. Disconnect the AC cord from the power source.
2. Disconnect the AC cord from the battery charger.
3. Disconnect the DC cord from the vehicle charger receptacle.
4. Apply electrical contact cleaner to the electrical plugs and receptacles. Refer to the manufacturer
instructions.
5. Clean the electrical plugs and receptacles.
6. Lightly lubricate the electrical plugs and receptacles with WD-40 ® .
BATTERY CHARGER USB RECEPTACLE
The USB receptacle can have intermittent connectivity because of environmental contaminates.
Always install the USB dust cover to protect the USB receptacle.
CLEAN THE USB RECEPTACLE
1. Disconnect the DC cord from the vehicle charger receptacle.
2. Disconnect the AC cord from the power source.
3. Carefully remove large contaminates.
4. Use compressed air in short intervals to remove dust and smaller contaminates.
5. Clean the port with a cotton swab and rubbing alcohol or electronics cleaner solvent. Let the
alcohol or solvent dry.
6. If contamination continues, apply dielectric grease to the USB receptacle.
7. Install the USB dust cover.
Battery Charger
Inspection And Maintenance
5