2008-2011 IQ Plus Electric Vehicle Maintenance and Service Supplement
Page 18-1
18
SECTION 18 – IQ DISPLAY MODULE (IQDM-P)
SERIES 2 PROGRAMMING
ý
DANGER
• See General Warning, Section 10, Page 10-1.
ý
WARNING
• See General Warning, Section 10, Page 10-1.
NOTE:
For information pertaining to the introductory display, menu navigation, and monitor, faults and fun-
tion menus,
See Section 12 - IQ DISPLAY MODULE (IQDM) and IQDM-P Diagnostics.
PLUGGING THE HANDSET INTO THE VEHICLE
1. Connect one end of the cable to the jack located on the bottom of the handset.
2. Connect the cable adaptor to the IQDM cable.
3. Find the IQDM jack mounted under the dash panel.
4. Remove the dust cap from the IQDM jack.
5. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack.
Figure 18-1 IQDM Jack Under Dash Panel
