Attachments and Buckets
2007 Carryall 295 Intellitach and XRT 1550 Intellitach Diesel Vehicle Owner’s Manual
Page 27
ATTACHMENTS AND BUCKETS
ý
WARNING
• Never use attachments or buckets that are not approved. Buckets and attachments for safe
loads of specified densities are approved for each model. Unapproved attachments can cause
injury or death.
NOTE: Warranty is void if non-approved attachments are used.
The dealer can identify for each model, the approved attachments and buckets. The buckets and attachments
are approved for attachment arm rated capacity and for secure fastening to the attachment interface.
Attachment arm rated capacity is determined by using the standard bucket and material of normal density,
such as dirt or dry gravel. If very dense material is loaded, the volume must be reduced.
Arm Rated Capacity* on page 38.
Exceeding the attachment arm rated capacity can cause the following problems
•
Steering may be difficult.
•
Tires may wear faster.
•
There will be a loss of stability.
•
The life of the vehicle will be reduced.
PALLET FORK
If a pallet fork attachment is used, the load center moves forward and reduces the attachment arm rated
capacity. The maximum load to be carried when using a pallet fork is shown on a decal (1) located on the pal-
let fork frame
.
ý
WARNING
• AVOID INJURY OR DEATH. Do not exceed attachment arm rated capacity. Excessive load can
cause tipping or loss of control.
See your dealer for more information about pallet fork inspection, maintenance and replacement. See your
dealer for attachment arm rated capacity when using a pallet fork and for other available attachments.
Figure 14 Do Not Overload Bucket or Attachments
Figure 15 Pallet Fork Loads
1
