Club Car DS Villager 4, Maintenance And Service Manual

Page: 385 / 510

GASOLINE VEHICLE - ELECTRICAL
COMPONENTS Solenoid
19
Figure 19-18 Solenoid Removal
3. Disconnect all the wires from the solenoid (2).
4. Remove the two screws (3).
5. Remove the solenoid.
SOLENOID INSTALLATION
1. Install the solenoid (1) in the vehicle (Figure 19-19, Page 19-19) .
Figure 19-19 Solenoid Installation
2. Install the two screws (2). Tighten the screws to 31 lb·in (3.5 N·m).
3. Connect the white wire to the large post (3) on the solenoid (Figure 19-20, Page 19-20) .
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual Page 19-19