Club Car DS Villager 4, Maintenance And Service Manual

Page: 133 / 510

STEERING AND FRONT SUSPENSION Front Suspension
7
FRONT SUSPENSION
See General Warnings on page 1-2.
LUBRICATION
Two grease fittings are provided (one in each spindle housing). Lubricate these fittings at the recommended interval
with the proper lubricant.
See Periodic Lubrication Schedules on page 10-8.
CAUTION
• To ensure proper lubrication, raise front of vehicle to lubricate. See General Warnings on page 1-2.
WHEEL ALIGNMENT
Wheel alignment is limited to equalizing the camber angle of each front wheel and adjusting toe-in of the front wheels.
CAUTION
• Prior to making any front suspension adjustments, inspect components for wear or damage and
repair or replace as necessary.
Camber Adjustment
1. Park the vehicle on a solid level surface.
2. Check each front wheel with a framing square. At the floor, there should be an equal amount of space between
each tire and the framing square
(Figure 7-8) .
Figure 7-8 Check Camber
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual Page 7-9