Club Car DS Villager 4, Maintenance And Service Manual

Page: 104 / 510

6
Brake Shoe Removal WHEEL BRAKE ASSEMBLIES
7. Loosen the left-hand thread jam nut (1) and right-hand thread jam nut (3) 1/2 inch (12.7 mm) away from
the turnbuckle (2)
(Figure 6-1) .
2
3
4
1
5
636
Figure 6-1 Loosen Turnbuckle
8. Loosen the turnbuckle to release tension on the equalizer bracket (4) that pulls on the heads of the brake
cables (5).
9. Remove the lugs nuts from the rear wheels.
10. Remove the rear wheels.
11. If the brake drums can be easily removed:
11.1. Remove the brake drums.
11.2. Electric Vehicle: Remove the axle shaft
Gasoline Vehicle: Remove the wheel hub assembly.
11.3. Using needle nose pliers, turn the retainer pin (6) 90° to remove the shoe retainer clip (7) (Figure 6-2) .
CAUTION
• The brake shoes are under pressure and can release suddenly when brake shoe retainers are removed.
1400-18100-10222B
Figure 6-2 Remove Shoe Retainer Clip
12. If the brake drums cannot be easily removed:
Page 6-2 2020 Precedent,Villager 2 and 4 Maintenance and Service Manual