Club Car Carryall XRT 1550, Maintenance And Service Manual

Page: 227 / 432

ELECTRICAL COMPONENTS: GASOLINE
VEHICLES Carburetor Solenoid
13
CARBURETOR SOLENOID
See General Warnings, Section 1, Page 1-2.
The carburetor solenoid is located on the bottom of the carburetor.
TESTING THE CARBURETOR SOLENOID
See Test Procedure 27 – Carburetor Solenoid Circuit on page 11-29.
CARBURETOR SOLENOID REMOVAL
1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2. Remove the front cover from the engine.
3. Disconnect the two-pin connector from the carburetor solenoid (Figure 13-3, Page 13-3) .
4. Remove the solenoid from the carburetor. See the Kawasaki FH680D engine manual (CC P/N 103351201).
2128
Figure 13-3 Carburetor Solenoid Connector
CARBURETOR SOLENOID INSTALLATION
1. Install the carburetor solenoid and tighten to 168 in-lb (19 N·m). See the Kawasaki FH680D engine manual (CC
P/N 103351201).
2. Connect the two-pin connector to the carburetor solenoid (Figure 13-3, Page 13-3) .
3. Install the engine front cover.
4. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.
2013 Carryall 295/XRT 1550 Maintenance and Service Manual Page 13-3