Club Car CARRYALL 502 ELECTRIC, Operator'S Manual

Page: 29 / 90

CARRYALL 502 ELECTRIC
Operators Manual
TPCC01DQ00EN019 (Edition C)
Page 27
KEY SWITCH
WARNING
THE KEY SWITCH CAN BE USED TO STOP THE VEHICLE IN AN
EMERGENCY. DO NOT BREAK OFF KEYS IN THE KEY SWITCH.
The key switch controls the motor and electrical system. A key is used to select
the key switch position. The key can only be inserted or removed when the key
switch is set to OFF.
POSITION CONDITION
OFF
Normal position when the vehicle is not in use.
Electrical power from the batteries is not available to power the motor or
electrical systems.
Note: Some electrical accessories operate independently of the key switch.
ON
Normal position when the vehicle is in use.
Electrical power from the batteries is available to power the motor and
electrical systems.
PARK BRAKE
WARNING
FAILURE TO ENGAGE THE PARK BRAKE CAN CAUSE PROPERTY
DAMAGE AND SERIOUS PERSONAL INJURY. AFTER THE VEHICLE
STOPS, ENGAGE THE PARK BRAKE UNTIL IT IS FULLY ENGAGED
AND PREVENTS THE VEHICLE FROM MOVING.
UNINTENDED VEHICLE OPERATION CAN CAUSE SERIOUS
PERSONAL INJURY OR DEATH. THE PARK BRAKE WILL RELEASE
AUTOMATICALLY WHEN THE ACCELERATOR OR BRAKE PEDAL IS
PUSHED. PREVENT ACCIDENTAL ACCELERATOR OR BRAKE PEDAL
ACTUATION.
The park brake is a variable position control that is used to make sure that a
vehicle does not move while parked.
Push the park brake firmly to engage the park brake.
To disengage the park brake, push the accelerator or brake pedal.
Vehicle Controls
Key Switch
3