Engine Oil
2007 Carryall 295/295 SE and XRT 1550/1550 SE Gasoline/Diesel Vehicle Owner’s Manual
Page 41
4. Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats.
5. To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2
grease (Dow Corning
®
BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside
surface of the filter before attaching it to the oil filter port
. Install the new oil filter
(gas: CCI P/N 1016467) (diesel: CCI/PN 102703301) onto the engine oil filter port.
See following NOTE.
NOTE: Use only Club Car oil filters designed for your engine.
6. Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pliers.
Figure 27 Remove Engine Oil Filter
Figure 28 Coat Rubber Seal
Figure 29 Add Engine Oil – Gasoline Vehicles
(Honda Shown)
Figure 30 Add Engine Oil – Diesel Vehicles
2
1
3