Engine Oil – Gasoline Vehicle
26
Figure 31
Remove Engine Oil Filter
10. Use a clean rag and wipe the oil filter mounting bracket surface clean where the oil filter gasket seats.
11. Install a new oil filter (CCI P/N 1016467) onto the engine oil filter port. Apply a light coat of white lithium NLGI
Number 2 grease (Dow Corning
®
BR2-Plus or equivalent) or new engine oil to the rubber seal around the
outside surface of the filter before attaching it to the oil filter port
(Figure 32)
. This will help seal the filter to
the oil filter mounting bracket.
NOTE:
Use only Club Car oil filters (CCI P/N 1016467) designed for this engine.
12. Tighten the oil filter by hand until tight. Do not use a band wrench or channel lock plier to tighten.
13. Remove the dipstick and add engine oil into the dipstick port. Use a funnel or pour spout to direct the oil into the
dipstick port. With filter change, the engine requires 38 ounces (1.12 liters) of oil per change. Refer to oil viscosity
guidelines for selection of oil grade
(Figure 33)
. Replace the dipstick.
SAE 5 W-30
SAE 10W-30/ SAE 10W-40
SAE 30
SAE 40
27
Figure 32
Coat Oil Filter Rubber Seal
213
Figure 33
Oil Viscosity Chart
14. Connect the battery cables, positive (+) cable first, and tighten terminals to 144 in-lb (16 N·m). Coat terminals with
Battery Terminal Protector Spray (CCI P/N 1014305).
Page 60
2008 Turf/Carryall Vehicle Owner’s Manual
Summary of Contents for Carryall 2 Plus
