Club Car Carryall 1500 2016, Maintenance And Service Manual

Page: 377 / 436

HYDRAULIC ATTACHMENT SYSTEM Attachment Interface
19
2
1
2222
Figure 19-3 Hand Lever Linkages and Pins
2223
Figure 19-4 Inspect Mount
Mount
NOTE: The following picture may not show your exact attachment but mounting frame inspections are the same.
Inspect the pin mounts (1), mounting flange (2) and all welds for wear, damage and cracks (Figure 19-4, Page
19-3) . Replace or repair parts as necessary.
REMOVING AND INSTALLING THE ATTACHMENT ARM MECHANISM
When the attachment arm mechanism is not being used, it can be removed from the vehicle.
NOTE: Remove the bucket or the attachment before attempting to remove the attachment arm mechanism from
the vehicle.
Attachment Arm Removal
2224
Figure 19-5 Lower Arm and Tilt Interface Forward
2225
Figure 19-6 Remove Interface Cylinder Retaining Pin
NOTE: When removing the cylinders from the attachment arm or the interface, the cylinders may need to be retracted
slightly. Do not have hands in the area of the cylinders when extending or retracting the cylinders.
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual Page 19-3