Club Car Carryall 1, Maintenance And Service Manual Supplement, Page: 164 / 176

IQ DISPLAY MODULE (IQDM-P) PROGRAMMING Plugging the Handset into the Vehicle
Page 18-2 2008-2011 IQ System Electric Vehicle Maintenance and Service Supplement
18
PROGRAM MENU
The program menu can be accessed by pressing the right arrow on the navigation button when the square
beside program is blinking (Figure 18-3) . When the program menu is active, use the up or down arrows on
the navigation button to go to the desired item in the program menu. Again, press the right arrow to select the
menu item. Use the change value button to change the values of the selected item as necessary.
The following parameters can be programmed with the handset from the program menu:
SPEED SETTING
The vehicle’s top speed can be changed by selecting values 1 through 3 (Figure 18-4) . If a value of 4 is dis-
played for the speed setting, a special access code has been entered to place the vehicle in “private speed
mode.” A speed setting of 4 cannot be selected with the
speed setting menu item. For additional information
on speed setting 4, refer to Code A, Code B, and Code C. See Code A, Code B, and Code C on page 18-3.
SPEED SETTING DESCRIPTION VEHICLE SPEED
1 Commercial speed 8.0 mph (12.9 km/h)
2 Slow golf speed 13.4 mph (21.6 km/h)
3 Normal golf speed 14.8 mph (23.8 km/h)
4 Private speed mode 19.6 mph (31.5 km/h)
Figure 18-3 Access Program Menu Figure 18-4 Change Speed Setting
2
3
Program
Monitor
Faults
Functions
Information
Programmer Setup
2
3 1
Program
min
SPEED SETTING
2
1
max
3