Bed Latch
18 2001 Carryall Electric Vehicle Owner’s Manual
To stop vehicle, release the accelerator pedal and depress the brake pedal until vehicle comes to a complete
stop.
PARKING AND LEAVING THE VEHICLE
1. After stopping vehicle, firmly depress park brake pedal until it locks. This will prevent vehicle from rolling.
2. Turn the key switch to OFF and place the shift handle in the NEUTRAL position. Remove the key when
the vehicle is not in use.
BED LATCH
The Carryall 1 and 2 are equipped with a bed latch on the driver side of the vehicle as standard equipment
(Figure 8, Page 18). To lift bed, pull latch handle toward back of the vehicle and lift the bed (Figure 9, Page 18).
To close the bed, lower it gently until the bed latch engages. DO NOT drop the bed.
PROP ROD
Read DANGER and WARNING on page 7.
The Carryall 2 is equipped with an automatically engaging prop rod and prop rod track on the driver side of
the rear body (Figure 10, Page 19). When pulling the bed latch handle and lifting the bed, the prop rod will
come to rest in one of the notches in the prop rod track.
• WHEN STOPPED ON A HILL, USE THE BRAKE PEDAL TO HOLD YOUR POSITION. DO NOT
USE THE ACCELERATOR PEDAL.
• KEEP HANDS AND FINGERS CLEAR OF CRUSH AREA BETWEEN THE BED AND THE SEAT
BACK SUPPORT.
• THE CARRYALL 2 IS EQUIPPED WITH AN AUTOMATICALLY ENGAGING PROP ROD, UNLESS
EQUIPPED WITH AN ELECTRIC BED LIFT OPTION (FIGURE 10, PAGE 19).
Figure 8 Bed Latch
Figure 9 Lift Bed
CAUTION
WARNING
NOTE
SEAT BACK
BED LATCH
Summary of Contents for Carryall 1 2001
Page 1: ...200 1 Owner s Manual Electric Vehicles Carryall 1 Carryall 2 Carryall 6...
Page 2: ......
Page 4: ...2 2001 Carryall Electric Vehicle Owner s Manual...
Page 43: ......