CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com
- 9 -
- 10 -
CLS REVO Basic / Modular / Retail
MEASUREMENTS
100 mm
13 mm
40 mm
100 mm
130 mm
70 mm
130 mm
100 mm
100 mm
25 mm
ø 10 mm
170 mm
REPLACE LENSES
This section shows how to replace the lenses inside the CLS Revo.
Glass
Cover plate
frame
Lensholder
Glass
Cover plate
frame
Lensholder
4
2
1
2
3
4
5
1
3
6
1. The CLS REVO.
2. Disassemble the cover plate by loosening the 4 screws.
3. Carefully lift the items out of the CLS REVO unit and take the lens holder.
4. Press the 8 lenses out of the lens holder and replace them with the desired lenses. Make sure all the lenses are
in the same direction as shown in picture 6.
5. Now carefully place the items in the CLS REVO unit in the right order as shown in picture 3.
6. Tighten the screws by order (crosswise) as shown in picture 6 on the cover plate
to keep the REVO waterproof. The CLS REVO is ready to be used with the desired lenses.
Make sure that the rubber sealing is correctly in place!
