11. AUDIO OUTPUT
Audio output for other devices such as VCR.
12. EXT. SPEAKER
Connect
the
external speaker if you need.
13. MIRROR/NORMAL IMAGE
You can switch this Dip switch with (-) driver for mirror or normal image. You can
view the mirror image if it is in the lower position, you can view the normal image
when it is in the upper position (default setting: mirror image).
14. DC POWER WIRES
There are 4 different kinds of wires as follows.
GROUND
: Connect the
BLACK
colored wire to vehicle’s chassis (Do not connect
it to the gas tank, the air bag and etc.).
DC 11V TO 32V (HOT)
: Connect the
RED
colored wire to the DC power line that
supplies DC 12V or 24V when ignition switch is in the “ON” position. The mode
switch on the front of the monitor must be in the manual mode. It doesn’t display
the picture on the screen in the auto mode.
BACK-UP LIGHT BULB
: Connect the
BROWN
colored wire to the (+) terminal
of back-up (rear turn signal) light bulb. The screen displays the picture only when
the vehicle is in motion on the reverse. The mode switch on the front of the monitor
must be in the auto mode.
HOW TO INSTALL
1. INSTALLATION OF MONITOR