CloudWalker CLOUD 43SF, User Manual, Page: 4 / 18

4 3
Preparation
Stand Installation
The TV base will be separated with the TV unit. You should install the base before you use the
TV unit.
1.Place the TV with its front side facing down on a cushioned flat surface.
2.Place the base on the hinge of TV unit, with the base direction shown under the base. (See
the picture)
3.Tighten the supplied screws to fix the TV stand securely in place. ( See the picture)
CLOUD TV 43SU
CLOUD TV 43SF
The type of power plug provided may be different from the above picture for some countries.
2
1
10cm
10cm
30cm
Place the TV on a firm and flat surface, leaving a space of at least 10cm around the set and
30cm from the top of the set to the wall.
Connect the antenna cable into the antenna input terminal at the rear panel wall antenna
socket.
Connect the power plug into the wall outlet.
Positioning the TV set
Antenna and Power Connections
WARNING
The TV stand may not be securely fixed in place after repeated tightening and loosening the screws.
During assembling and disassembling the TV stand, please use your hand to support it. Failing to do
so may cause the TV stand to fall and result in personal injury.
After installing the TV stand, please ensure that the screws are tightened firmly. Failure to do so may
cause the TV set to tip over or become damage.
PT, 4X14 4PCS
RF IN
CLOUD TV 43SF
RF IN
CLOUD TV 43SU
2
1