Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd.
24
EZCAD main interface view
Cloudray LiteMarker marking machine is controlled by the included EZCad2 Lite software,
which must be installed on a compatible computer to direct the laser. See its separate
instruction for full details on its components and use. Some features which are particularly
important to note include the following parameters and controls:
6.3.1. Marking parameter
•
Loop Count / Mark Loop
—
Specifies how many times the laser beam will repeat its
path, creating greater contrast in the marked image.
•
Speed
—
Specifies the speed of the beam in millimeters per second, with greater speed
creating less contrast in the marked image.
•
Power
—
Specifies the % of the machine's rated power that will be used, with greater
power creating greater contrast. Note again that running the machine at greater than 80%
power will shorten its service life and 10
–75% is recommended for most applications.
•
Frequency
—
Specifies the laser’s frequency in kilohertz (kHz), with higher frequency
producing a denser laser mark and darker engraving. (for 20&30W Q-pulse fiber laser, the
adjustment range is 30-60kHz; for 50W Q-pulse fiber laser, the adjustment range is 50-
100kHz)
