![Cloudleaf GW-1A2I2 User Manual Download Page 4](http://html1.mh-extra.com/html/cloudleaf/gw-1a2i2/gw-1a2i2_user-manual_2626384004.webp)
CloudLeaf, Inc. Proprietary InformationElectronically Controlled. Latest revision is in the CloudLeaf Drive.
A printed copy is uncontrolled and may be outdated unless it bears a red ink “controlled copy” stamp.
4
The Gateway is designed to operate in the following conditions:
Temperature: 0 to 60
C
Humidity: 0 to 95% RH
FCC Statement
Warning: Modifications not expressly approved by the manufacturer could void the user
authority to operate the equipment under FCC Rules. “FCC RF Radiation Exposure Statement
Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at
least 20cm from nearby persons.”
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To ensure compliance with the class B FCC limits, a shielded USB cable must be used with this
unit. The Ethernet cable must be either unshielded twisted pair (UTP) or shielded.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference and
This device must accept any interference received, including interference that may
cause undesired operation.