DLM-1 Series Installation Guide V1.0
11
TECHNICAL SPECIFICATIONS
Audio performance - mic input
Sensitivity
-50 dBu nominal
Gain range
20 to 40 dB
High pass filter
120 Hz, 12 dB/octave
Input headroom
12 dB
Frequency response
20 Hz – 20 kHz +0.5 dB/-0 dB (HPF disabled)
Noise
Noise gate inactive: -65 dBr, rel 0 dBFS output
(Noise gate active: -95 dBr)
Audio performance – line inputs
Sensitivity
via RCA/phonos: 0 dBu nominal
via 3.5 mm jack: -10 dBV nominal
Maximum input level
via RCA/phonos: +11 dBu
via 3.5 mm jack: +4 dB
Frequency response
20 Hz – 20 kHz +0.5 dB/-0 dB
Noise
-90 dBr, rel 0 dBFS output
Dante specifications
Dante transmit channels
2
Simultaneous receive flows
2
Dante receive channels
2
Simultaneous transmit flows
2
Sample rates
Dante
44.1 kHz, 48 kHz
AES67
48 kHz
Encoding
16/24/32-bit PCM (default 24-bit)
Data rates
10 Mb/s, 100 Mb/s
Connector
1 x RJ45
LEDs
Network speed (yellow), activity (green)
Software compatibility
Audinate Dante Controller (configuration and routing)
Audinate DDM (security and domain management)
Other
Power requirements
Via PoE. A Class 1 (3.84 W max.) injector required for use
with non-PoE switches.
Power consumption: <1 W
Net dimensions, inc. faceplate controls
(w x h x d)
DLM-1 (UK)
145 mm x 85 mm x 50mm (5.71” x 3.35” x 1.97”)
DLM-1A (US)
112 mm x 110 mm x 50 mm (4.41” x 4.33” x 1.97”)
Shipping dimensions (w x h x d)
All versions
200 mm x 145 mm x 83 mm (7.87” x 5.71” x 3.27”)
Net weight
All versions
252 g (8.9 oz)
Shipping weight
350 g (12.3 oz)
Should you have any questions concerning the installation and connection of the DLM-1, please visit
,
where you will find additional technical information.
