manualshive.com logo in svg

Cloud MA60, Installation And User Manual

Share
Download
Cloud MA60 Installation And User Manual Download Page 15

MA60 & MA60

media

 Installation and User Guide v1.0

15

Rackmounting two units

Two MA60/MA60

media

 units may be rackmounted side-by-side with the RE-S 

mounting kit.
The RE-S kit consists of two rack ears, two connecting plates and sixteen M4 

countersunk screws. To rack-mount a pair of MA60/MA60

media

s, proceed as follows:

1. 

Fit one of the rack ears to the left-hand side of one of the MA60s as shown 

in the diagram below, using four of the screws provided.

2. 

Repeat Step 1 for the right-hand side of the other MA60 unit.

3. 

Remove the two raised-head, hex-socket M4 screws at the right-hand side 
of the front panel of the first unit, and the corresponding two screws on the 

left-hand side of the front panel of the second unit.

4. 

Line the two units up next to each another, and fit one of the two flat 

connecting plates to the front panels, using four more of the screws 

provided. The raised-head screws are no longer required.

5. 

Repeat Step 4, fitting the remaining connector plate at the rear of the units.

Summary of Contents for MA60





































Reviews:

No comments

Brands by name

Popular brands

Load more brands