CS-C Series Installation Guide V2.1
3
INSTALLATION
Step 1
Remove speaker from box.
Step 2
Mark and cut hole in ceiling or ceiling tile.
Use included hole template.
271mm (10.67”)
CS-C3 = 140mm (5.50”)
Step 3
Locate euroblock in accessory bag and connect signal wire.
For daisy-chaining use “LINK” output to run to next speaker.
Step 4
Remove grille and set tap switch to proper setting and attach
grille leash to baffle. Tap switch is preset to highest 100 V
position.
Step 5 (Ceiling Tile Only)
Place tile bridge on back of ceiling tile. Align holes and insert
speaker in hole. Tighten dog ears. Do not overtighten.
Step 6
Insert euroblock into rear of back can. Attach safety restraint
to rear of back can. Close and secure cover plate.
