21
Image 4-8 Network port communication connection
The device has been written IP address 192.168.1.116 as default. If you forget or need to
modify, using serial connection "connection" after connect successfully, then you can found the
current IP address through select “settings”
> "senior" > “configuration”, set up the IP
address in “Network port settings” when “configuration” dialog pops up. See image 4-9
Note
:
The IP address of the reader can’t be repeated. Use the Ping command to test
whether the network is connected on PC.
image 4-9 reader configuration
4.5.1.3 RS485 communication connection
Select the communication mode in the "connect to the reader" option "485 connection
(serial port)", "connect parameter" select "COM?" (select PC serial number), communication rate
select "115200", enter the RS485 address, then click OK, as shown in image 4-10.