background image

2

BEFORE BEGINNING

 Please read all instructions carefully.

 Familiarize yourself with all parts (see “PARTS”) and check quantities.

 Follow all safety precautions (see “SAFETY PRECAUTIONS”).

 

WARNING

 CHOKING HAZARD FOR SMALL CHILDREN.

 This unit 

contains small parts which could be a choking hazard for 
small children. Children should be under adult supervision 
at all times or serious injury could occur.

 ALWAYS UNLOAD UNIT PRIOR TO MOVING THE UNIT.

 

The weight of personal belongings can cause the unit to 
become unstable and either tip or collapse. Serious bodily 
injury and/or damage to personal belongings may occur.

 DO NOT OVERLOAD UNIT. 

If any shelf, top, or bottom 

of unit bows or bends, it is overloaded. The shelf, top, or 
bottom could collapse and cause serious bodily injury and/
or damage to personal belongings. Evenly distribute loads.

 DO NOT MOUNT OR ATTACH ANYTHING TO THE SIDES, 

REAR, OR FRONT OF THE UNIT

 as this can create a force 

which can cause the unit to tip. Serious bodily injury and/or 
damage to personal belongings may occur.

 DO NOT CLIMB OR STEP ON THE UNIT.

 The unit may 

become unstable and either tip or collapse. Serious bodily 
injury and/or damage to personal belongings may occur.

 DO NOT USE THIS UNIT AS A TELEVISION STAND.

 

Serious bodily injury and/or damage to personal 
belongings may occur.

 DO NOT STACK UNITS. 

Stacking of units can cause an 

unsafe tip-over hazard which may cause serious bodily 
injury and/or damage to personal belongings.

 FOLLOW PROPER SAFETY PROCEDURES WHEN USING 

POWER TOOLS AND LADDERS.

 PROTECT YOUR WORK SURFACE DURING ASSEMBLY.

This can prevent scratching or damage to table tops, 
wood floors, etc.

 UNIT DOES NOT PROVIDE PROTECTION AGAINST 

ELECTRICAL SHOCK.

SAFETY PRECAUTIONS

STOP

FOLLOW INSTRUCTIONS 

CAREFULLY

Please do not return product to the retail store. 

For product assistance and warranty information 

please call Consumer Affairs at 1-800-874-0008.

Manufacturer Warranty

Manufacturer will replace any missing or damaged part 

due to manufacturer defect for one year after purchase. 

Please have proof of purchase for warranty claims.

•  Do not let any sharp objects touch or rub the surface of 

the product.

•  When assembling, do not let children play around the 

working area.

•  Please confirm all parts are correct before starting the 

assembly process.

•  DO NOT OVERTIGHTEN. USE CAUTION IF USING POWER 

TOOLS DIRECTLY ON UNIT. Power tools can overtighten 
screws and strip threads.

We recommend you hand-tighten screws. 

Please note location of predrilled holes.

Summary of Contents for PRO GARAGE 10844














Reviews: