5
© 2020 ClosetMaid LLC | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
12
SECURE STANDARDS TO WALL
DRYWALL
DRILL 1/2 in. HOLE
AA
BB
A)
Make sure each standard is level and mark the screw holes in the standards using a pencil. Predrill any necessary holes according to the illustration. Insert anchors if installing on a
concrete wall or toggle bolts if installing on drywall. Secure each standard to the wall using recommended hardware as shown. Use a Phillips screwdriver to tighten each panhead screw
or bolt.
*It’s recommended to test fit a 72 in. shelf in the upper standards and a 48 in. shelf in the lower standards, measure plumbs, and carefully mark
holes before drilling.
A
B
C
B)
Attach standards by using standard extenders. Slide the standard extenders
into the slots as shown. Mark holes for drilling while making sure the
standards are level.
CONCRETE
DRILL 1/4 in. HOLES
CC
DD
CC
STUD
C