5
Connect metal side panels to bottom wood panel.
STEP 1
Hex Screw x4
Align both metal side panels (A & B) with the bottom wood panel (C) as shown.
The top/bottom wood panels (C)
will only have holes on one side. Make sure the horizontal bars on each metal side panel are below the screw holes
and facing toward the inside of the assembly (fig. 1). The two X brace holes on the side of each panel should be facing
toward the back of the assembly.
Use the supplied allen wrench (AA) to secure both metal side panels (A & B) to the bottom wood panel (C) using two hex
screws (BB) per side.
*Please note location of predrilled holes on each part.
fig. 1
A
B
C
BB
AA
BB
BB
C
Allen Wrench x 1
AA
