![background image](http://html1.mh-extra.com/html/closer-to-nature/perfect-prep/perfect-prep_instructions-for-use_2625841003.webp)
2. USAGE
Before each use you must ensure that your water tank is above the minimum fill mark.
Water to fill the unit must come from the cold tap.
Check the water level and top up if
necessary with
COLD WATER
. When
filling the tank, you must always fill the
hopper and as the water passes through
the filter you can regularly top it up.
1
Turn the dial to select the feed
size you require (120ml – 330ml).
2
Position your sterilised bottle
under the dispenser. Adjust bottle
stand if necessary. (Bottle neck
should sit close to the outlet).
3
Press the start/stop button. A red
light will flash and a volume of
HOT
WATER
is dispensed into
your bottle.
4
5
The light will change to solid red
and there will be a double beep
to indicate the end of the first
stage. You will need to make up
your feed within 2 minutes.
Carefully remove the bottle from
the stand and measure the
correct number of formula
scoops into the bottle.
6
7
Screw the sterilised milk storage
lid onto the bottle and ensure
that the lid is tight. Be careful
when handling hot liquid.
Shake well until the formula
powder has dissolved.
8
9
Remove the milk storage lid and
replace your bottle onto the
bottle stand.
10
11
Always check that the amount
dispensed is consistent with the
size of feed you have selected on
the dial. Add the sterilised teat,
screw ring and hood and shake.
12
13
For your child’s safety always
check food temperature before
feeding by testing on a sensitive
part of your skin.
Your bottle is now ready to serve.
Make sure you discard any
unwanted feed as per the formula
manufacturers recommendation.
Press the start/stop button again.
The red light will go out and the
green light will flash. If this button
is not pressed within 2 minutes of
the hot water being dispensed a
long beep will sound. If the alarm
sounds you should discard the feed
and repeat the process from step 1.
Wait whilst the remainder of
water is dispensed. Once
completed, there will be a
double beep and the green
light will change to solid.
If at any point you need to stop the perfect prep™ machine you can
do so by pressing the start/stop button. The pump may continue to
run for a few seconds and the green light will illuminate to show that
the process has ended. It will not be possible to restart the machine
for 20 seconds. Should you have to stop the perfect prep™ machine
please discard of any feed.
HOW TO STOP THE PERFECT PREP™ MACHINE
For a cool tank keep the unit out of direct sunlight and away from
sources of heat. Fill with
COLD WATER
from the fridge. Regularly top
up with
COLD/COOLED WATER
.
HINTS AND TIPS