Cloos Arc Flash 4 evo Operating Instructions And Spare Parts List Download Page 7

7

Choking hazard

The user is advised to leave the contaminated area immediately if:

•  The Manufacturer‘s Minimum Design Flow (MMDF) warning Alarm 

sounds.

•  breathing becomes difficult,
•  dizziness or distress occurs,
•  any part of the system becomes damaged,
•  airflow into the Head-Unit decreases or stops,
•  contaminant can be smelt or tasted inside the Head-Unit,
•  Materials that may come into contact with the users skin are not 

known to cause allergie reactions to the majority of individuals but in 
the unlikely event of a reaction, the user should immediately leave the 
contaminated area, remove the unit and seek medical advice.

2.5  Warranty clause

If any of these conditions are not kept or followed, the warranty is automa-
tically invalid.

Nothing is allowed to touch the moving parts.

There is no attempt to modify or alter the unit or filter in any way. No wa-
ter or other Iiquids enter the unit in any way - in particular the motor and 
fan, the filter or the battery.

Make sure that the headpiece fits the user‘s face perfectly. Only then the 
efficiency of the system is sufficient. The protective factor of the complete 
system is reduced if the seal of the headpiece is not fitted properly, for e.g. 
due to beards or long hair intervening into the seal line.

There is a possibility that the hose to the head unit may become caught up 
in use. The blower unit should be positioned on the person in such a way 
as to reduce this possibility. 

Filters cannot be fitted directly to the head units and should not be adap-
ted to do so. Correct respiratory protection will not be provided if any parts 
of the equipment are modified. At very high work rates the pressure in the 
device may become negative at peak inhalation flow. Blower unit systems 
are for use only by competent, trained personnel.

Filters should not be modified to fit different blower units.

WARNING!

Summary of Contents for Arc Flash 4 evo





















Reviews: