ClonerAlliance Box Turbo, User Manual

Page: 28 / 37

ClonerAlliance Box Turbo User Manual
Tips to choose the right USB storage device:
• FAT32 (32GB and below size are recommended) and NTFS format are available. Note: exFAT format does not work
with ClonerAlliance Box Turbo.
• Using NTFS formatted storage device, the video will be recorded as a single file.
• For external hard drive, MBR partition type is required.
• It
’
s recommended that the reading speed and writing speed are both 50Mbps or more. The faster the speed is, the
better the performance will be.
• During the working process, please do not pull out the USB flash drive from Box Turbo directly. Direct removal will
be prone to file damage.
• After formatting the USB flash drive using PC, please make sure to safely remove the USB device instead of unplugging
it directly, otherwise the USB flash drive will be damaged and not work properly.
Why is there a prompt
“
Can
’
t detect USB Device
”
?
Please format your USB stick or unplug the USB stick from the USB port and plug it into ClonerAlliance Box Turbo again.
If the solutions don
’
t work, please send an email to support@cloner-alliance.com for direct help.
Why does LED Keep Flashing Blue&Green?
ClonerAlliance Box Turbo will flash alternatively blue and green after you power on the product. It is normal. After all
devices are connected and powered on, the LED of ClonerAlliance Box Turbo will turn to be stable BLUE or stable GREEN
(NO FLASHING). If it keeps flashing, please check the steps below:
23